Dynamics Parameters - Yamaha 01V96i Reference Manual

Dynamics Parameters

The dynamics effects for each channel strip include a Gate section (only for Input Channels)
and a Comp section. The Gate section includes Gate and Ducking types. The Comp section
includes Compressor, Expander, Compander Hard (COMP. (H)), and Compander Soft
(COMP. (S)) types.
GATE Section (Only for Input Channels)
GATE
A gate attenuates signals below a set THRESHOLD level by a specified amount (RANGE).
Parameter
THRESHOLD (dB) –54.0 to 0.0 (541 points)
RANGE (dB)
ATTACK (ms)
HOLD (ms)
DECAY (ms)
I/O Characteristics
THRESHOLD
Input Level
Range
–70 to 0 (71 points)
0–120 (121 points)
44.1kHz: 0.02 ms – 2.13 sec
48kHz: 0.02 ms – 1.96 sec
88.2kHz: 0.01 ms – 1.06 sec
96kHz: 0.01 ms – 981 ms
(160 points)
44.1kHz: 6 ms – 46.0 sec
48kHz: 5 ms – 42.3 sec
88.2kHz: 3 ms – 23.0 sec
96kHz: 3 ms – 21.1 sec
(160 points)
Time Series Analysis
THRESHOLD
RANGE
Dynamics Parameters
This determines the level at which the gate effect is
applied.
This determines the amount of attenuation when
the gate closes.
This determines how fast the gate opens when the
signal exceeds the threshold level.
This determines how long the gate stays open
once the trigger signal has fallen below the thresh-
old.
This determines how fast the gate closes once the
hold time has expired. The value is expressed as
the duration required for the level to change by
6 dB.
Input Signal
RANGE
Time
151
Description
Output Signal
HOLD
ATTACK DECAY
Time
01V96i—Reference Manual