Yamaha 01V96i Reference Manual page 55

■ Surround Pan Monitoring
To monitor surround pan movement, patch the Bus Outs to the analog outputs, to which a monitoring system is connected.
The following diagram illustrates an example in which Bus Out 1/2 (left and right front channel) signals are output from the STE-
REO OUT L/R connectors and Bus Out 3–6 signals are output from the OMNI OUT 1–4 connectors in 5.1 Surround mode.
01V96i
SURROUND
PAN
Input Channel 1
LFE LEVEL
SURROUND
PAN
Input Channel 2
LFE LEVEL
SURROUND
PAN
Input Channel 3
LFE LEVEL
Tip: To output left and right front signals of the surround channels from the STEREO OUT L/R connectors, turn on the Surround LR to Stereo
checkbox on the Surr Bus page.
Setting Up and Selecting Surround Pan Modes
Front L
STEREO OUT L
STEREO OUT R
OMNI OUT 1
OMNI OUT 2
OMNI OUT 3
OMNI OUT 4
Rear L
Subwoofer
Center Front R
Front L
Front R
Rear L
Multi-channel
Rear R
amplifier
Center
Subwoofer
Rear R
01V96i—Reference Manual
55