Yamaha 01V96i Reference Manual page 86

86
Remote Control
5
INSERT ASSIGN/EDIT section
This section enables you to insert plug-ins into Pro Tools
channels and adjust plug-in settings. Use the left and right
[ ]/[ ] Tab Scroll buttons to change the parameters
displayed in this section.
• ASSIGN
Turn on this button to insert plug-ins into Pro Tools
channels. (If you are using the TDM system, you can also
assign outboard effects processors.)
• COMPARE
You can compare your edits with the original settings by
turning on this button. This button works in unison with
the Compare button in the Pro Tools Inserts and Sends
windows.
• BYPASS
Turning on this button bypasses the plug-ins (see
page 92).
• INSERT/PARAM
Switching this button to INSERT enables you to assign
plug-ins using four rotary controls on the page. Switching
this button to PARAM enables you to adjust the plug-in
parameters using the four rotary controls (see page 91).
• Information box
This box displays plug-in parameter names, values, alarm
messages from Pro Tools, etc.
• Rotary controls 1–4
These controls enable you to select plug-ins or adjust the
selected plug-in parameters.
01V96i—Reference Manual
■ Channel Display mode ( [F3]
button)
Press the [F3] button to select this display mode, in which the
parameter controls for tracks 1–16 are displayed.
• Parameter controls 1–16
Channel parameter controls, such as channel 1–16 pan-
pots, Send A–E send levels, etc. are displayed.
■ Meter Display mode ( [F4] button)
Press the [F4] button to select this display mode, in which the
level meters for tracks 1–16 are displayed.
• Channels 1–16
The channel 1–16 levels or Send levels are displayed.