Yamaha 01V96i Reference Manual page 102

102
MIDI
Selecting MIDI Messages for
Transmission and Reception
You can select MIDI messages to be transmitted or received at
a specified port.
To do so, press the DISPLAY ACCESS [MIDI] button, then
press the [F1] button to display the MIDI | Setup page.
1
2
3
4
5
6
7
Select MIDI channels for transmission and reception in the
CHANNEL row, and turn the transmission and reception of
each MIDI message on or off using the buttons in the param-
eter rows from PROGRAM CHANGE to OTHER COM-
MANDS.
1
CHANNEL
This parameter row enables you to specify MIDI Chan-
nels for MIDI message transmission and reception. The
following parameters are available in this row:
• Tx ..............................This parameter box specifies a MIDI
Transmit Channel.
• Rx ..............................This parameter box specifies a MIDI
Receive Channel.
2
PROGRAM CHANGE
This parameter row enables or disables transmission and
reception of Program Changes.
• Tx ON/OFF ............Transmission of Program Change
messages is enabled or disabled.
• Rx ON/OFF ............Reception of Program Change mes-
sages is enabled or disabled.
• OMNI ON/OFF.....When this button is turned on, Pro-
gram Changes on all MIDI Channels
are received regardless of the
CHANNEL row settings.
• ECHO ON/OFF.....This button determines whether
Program Change messages received
at the MIDI IN port are echoed
through to the MIDI OUT port.
3
CONTROL CHANGE
This parameter row enables or disables transmission and
reception of Control Changes.
• Tx ON/OFF ............Transmission of Control Change
messages is enabled or disabled.
• Rx ON/OFF ............Reception of Control Change mes-
sages is enabled or disabled.
• ECHO ON/OFF.....This button determines whether
Control Change messages received
at the MIDI IN port are echoed
through to the MIDI OUT port.
01V96i—Reference Manual
4
PARAMETER CHANGE
This parameter row enables or disables transmission and
reception of Parameter Changes.
• Tx ON/OFF ............Transmission of Parameter Change
messages is enabled or disabled.
• Rx ON/OFF ............Reception of Parameter Change mes-
sages is enabled or disabled.
• ECHO ON/OFF.....This button determines whether
Parameter Change messages
received at the MIDI IN port are
echoed through to the MIDI OUT
port.
5
BULK
This parameter row enables or disables reception of Bulk
Dump data.
• Rx ON/OFF ............Reception of Bulk Dump data is
enabled or disabled.
6
OTHER COMMANDS
• ECHO ON/OFF.....This button determines whether
other MIDI messages received at the
MIDI IN port are echoed through to
the MIDI OUT port.
7
Fader Resolution
This parameter specifies the resolution of the value out-
put when you operate the 01V96i's faders. To transfer
fader value data between two cascaded 01V96is, or to
record the 01V96i operation to or play it back from a
sequencer, select the HIGH button. When the LOW but-
ton is selected, the fader resolution switches to 256 steps.