Yamaha 01V96i Reference Manual page 88

88
Remote Control
Parameter
DAW REW Fast rewinds the cursor position.
DAW SHUTTLE Switches the Wheel mode to Shuttle.
Switches the Wheel mode to Scrub
DAW SCRUB
(Jog).
You can audition the pre-roll,
post-roll, in-point area, or out-point
area by holding down the button to
DAW AUDITION which this function is assigned and
pressing a button to which DAW
PRE, DAW POST, DAW IN, or DAW
OUT is assigned.
Plays back from the pre-roll point up
DAW PRE to the beginning of the selected
area.
Plays back from the beginning of the
DAW IN selected area for a duration specified
as the pre-roll.
Plays back to the end of the selected
DAW OUT area for a duration specified as the
post-roll.
Plays back from the end of the
DAW POST selected area for a duration specified
as the post-roll.
Moves the playback cursor to the
DAW RTZ
beginning of the session.
Moves the playback cursor to the
DAW END
end of the session.
DAW ONLINE Toggles between on-line and off-line.
DAW LOOP Toggles Loop Playback on and off.
DAW
Toggles QuickPunch on and off.
QUICKPUNCH
DAW AUTO FADER
DAW AUTO MUTE
DAW AUTO PAN
Correspond to the Automation Over-
DAW AUTO SEND
write (Auto Enable) functions.
DAW AUTO
PLUGIN
DAW AUTO
SENDMUTE
DAW AUTO READ
DAW AUTO
TOUCH
DAW AUTO LATCH
Select Automation modes.
DAW AUTO WRITE
DAW AUTO TRIM
DAW AUTO OFF
Cancels Automation recording and
playback for all channels. When
DAW AUTO
Automation is interrupted, the LED
SUSPEND
flashes, and channel strip controls
maintain the current settings.
Displays the channel Automation
mode (Read, Tch, Ltch, Wrt, or Off).
The mode setting appears at the bot-
DAW AUTO
tom of each channel on a Channel or
STATUS
Meter Display page when you press
and hold the button to which this
function is assigned.
01V96i—Reference Manual
Function Parameter
Displays a Group ID (to which each
channel belongs) below each chan-
DAW GROUP nel number on a Channel or Meter
Display page (in all caps for a main
STATUS
group and in lowercase letters for a
sub-group).
Pressing the key (to which this func-
DAW MONI tion is assigned) enables you to view
the current monitoring mode and
STATUS
the channel strip type.
Pressing the key (to which this func-
DAW CREATE
tion is assigned) enables you to exe-
cute the function specified in the
GROUP
menu of the Pro Tools Group list.
Suspends all mix groups temporarily.
DAW SUSPEND
Press the button again to undo sus-
GROUP
pension.
DAW WIN
Shows or hides the Transport win-
dow.
TRANSPORT
DAW WIN INSERT Shows or hides the Insert window.
Toggles between the Mix window
DAW WIN
and Edit window. (Both windows are
MIX/EDIT
not displayed at the same time.)
DAW WIN
Shows or hides the Memory Loca-
tions window.
MEM-LOC
DAW WIN STATUS Shows or hides the Status window.
Executes the Edit menu's Undo/Redo
DAW UNDO
command.
Executes the Edit menu's Save com-
DAW SAVE
mand.
Pressing the button (to which this
function is assigned) repeatedly
DAW EDIT MODE
selects Shuffle, Slip, Spot, or Grid
edit mode in this order.
Pressing the button (to which this
function is assigned) repeatedly
selects one of seven edit tools
DAW EDIT TOOL
(Zoomer, Trimmer, Selector, Grab-
ber, Smart Tool, Scrubber, and Pen-
cil, in this order).
DAW SHIFT/ADD Functions in the same way as Macin-
tosh keyboard keys (Shift, Option,
DAW OPTION/ALL
Control, and Alt). Pressing one of the
DAW
buttons (to which these functions
CTRL/CLUCH are assigned) along with another
button enables you to execute vari-
DAW ALT/FINE
ous commands.
DAW BANK + Executes the Bank Swap operation.
Pressing the button (to which this
function is assigned) switches the
DAW BANK –
entire 16-channel bank.
DAW Channel + Executes the Channel Scroll opera-
tion. Pressing the buttons (to which
these functions are assigned) enables
DAW Channel –
you to scroll channels horizontally.
Function