Yamaha 01V96i Reference Manual page 140

140
Appendix: Parameter Lists
DELAY+REV
One input, two output delay and reverb effects in
parallel.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
DELAY HI 0.1–1.0
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
DLY.BAL 0–100%
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
SYNC OFF, ON
1
NOTE L
NOTE R 1
NOTE FB
1
1.
(Maximum value depends on the tempo setting)
01V96i—Reference Manual
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
Delay high-frequency feedback
ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and reverb balance (0% =
all delay, 100% = all reverb)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine left channel DELAY
L
Used in conjunction with TEMPO
to determine right channel
DELAY R
Used in conjunction with TEMPO
to determine FB. DLY
DELAY->REV
One input, two output delay and reverb effects in
series.
Parameter Range
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB. DLY 0.0–1000.0 ms
FB. GAIN –99 to +99%
DELAY HI 0.1–1.0
THRU,
HPF
21.2 Hz–8.00 kHz
50.0 Hz–16.0 kHz,
LPF
THRU
DLY.BAL 0–100%
REV TIME 0.3–99.0 s
INI. DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
SYNC OFF, ON
1
NOTE L
NOTE R *1
NOTE FB *1
1.
(Maximum value depends on the tempo setting)
DIST->DELAY
One input, two output distortion and delay effects in
series.
Parameter Range
DST1, DST2,
DST TYPE OVD1, OVD2,
CRUNCH
DRIVE 0–100
MASTER 0–100
TONE –10 to +10
N. GATE 0–20
DELAY 0.0–2725.0 ms
FB. GAIN –99 to +99%
HI. RATIO 0.1–1.0
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
DLY.BAL 0–100%
SYNC OFF, ON
1
DLY.NOTE
MOD.NOT
2
E
1.
(Maximum value depends on the tempo setting)
2.
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
Delay high-frequency feedback
ratio
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Delay and delayed reverb bal-
ance (0% = all delayed reverb,
100% = all delay)
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Spread
Reverb density
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine left channel DELAY
L
Used in conjunction with TEMPO
to determine right channel
DELAY R
Used in conjunction with TEMPO
to determine FB. DLY
Description
Distortion type (DST = distor-
tion, OVD = overdrive)
Distortion drive
Master volume
Tone control
Noise reduction
Delay time
Feedback gain (plus values for
normal-phase feedback, minus
values for reverse-phase feed-
back)
High-frequency feedback ratio
Modulation speed
Modulation depth
Distortion and delay balance
(0% = all distortion, 100% = all
delayed distortion)
Tempo parameter sync on/off
Used in conjunction with TEMPO
to determine DELAY
Used in conjunction with TEMPO
to determine FREQ.