Yamaha 01V96i Reference Manual page 108

108
MIDI
5.
If necessary, move the cursor to the parame-
ter box next to the selected button, then
rotate the Parameter wheel or press the
[INC]/[DEC] buttons to select the desired
bulk dump data.
Tip: If you selected [ALL] in the parameter box, all data
selected by the corresponding button is transmitted as bulk
dump data.
6.
To start transmitting bulk data, move the cur-
sor to the TRANSMIT button, then press
[ENTER].
Bulk Dump is executed. During the operation, the Bulk
Dump window appears, indicating the current bulk
dump status. To abort the bulk dump operation, move the
cursor to the CANCEL button in the window, then press
[ENTER].
Tip: To transmit bulk dump request messages, move the cur-
sor to the REQUEST button, then press [ENTER]. If you set
up the 01V96i so that it will transmit and receive MIDI mes-
sages to and from another 01V96i, the other 01V96i will
respond to the bulk dump request and transmit the bulk
dump data to the 01V96i you are operating.
7.
To receive bulk data, press the DISPLAY
ACCESS [MIDI] button again to display the
MIDI | Setup page, then turn on the Rx
ON/OFF button in the BULK row.
Now, when the 01V96i receives bulk data, the corre-
sponding internal data is updated.
Note: Bulk data can be transmitted and received between the
01V96i and the 01V96V2 / 01V96VCM. Compatibility
depends on the type of data, as follows.
Data that can be transmitted and received between the
01V96i and the 01V96V2 / 01V96VCM in either direction
SCENE MEM:
EQ LIBRARY:
GATE LIBRARY:
COMP LIBRARY:
CHANNEL LIBRARY:
EFFECT LIBRARY:
BANK:
SETUP MEMORY:
PGM TABLE:
CTL TABLE:
Data that can be only be transmitted by the 01V96V2 /
01V96VCM and received by the 01V96i (and not in the other
direction)
INPUT PATCH LIBRARY:
OUTPUT PATCH LIBRARY:
01V96i—Reference Manual