Draytek Vigor C410 Series User Manual page 308

Enforce HTTPS Access
LLDP
Port
LAN Access
IPv4/IPv6 WAN Access
TLS 1.3/TLS 1.2
WAN Access Control
LAN Access Control
Cancel
Apply
Management Services
Switch the toggle to enable/disable the feature of allowing system
administrators to login Vigor router via HTTPS.
Switch the toggle to enable/disable the LLDP service.
Specify user-defined port numbers for the HTTP, HTTPS, SSH, Telnet
and SNMP servers.
Select the checkbox to allow the system administrators to login from
LAN interface. Later, configure the LAN Access Control below to
determine who (the client) is able to access the LAN management
services (HTTP, HTTPS, SSH, Telnet and SNMP).
Select the checkbox to allow the system administrators to login from
IPv4/IPv6 WAN interface. Later, configure the WAN Access Control
below to determine who (the client) is able to access the IPv4 WAN
management services (HTTP, HTTPS, SSH, Telnet and SNMP).
TLS Encryption
Switch the toggle to enable or disable the function.
Access Control List
In general, all the clients via WAN interface can access the IPv4 WAN
management services (based on the HTTP, HTTPS, SSH, Telnet and
SNMP checkboxes selected).
WAN Access Control Mode – Select Disabled or Allow List.
Disabled - The default is Disabled.

Allow List – Click +Add to have a new entry. The maximum

number you can add is up to 6.
Only the chosen IP objects within the selected IP group object can
access the services listed on this page via the WAN interface.
In general, all the clients via LAN interface can access the LAN
management services (based on the HTTP, HTTPS, SSH, Telnet and
SNMP checkboxes selected).
LAN Access Control Mode - Select Disabled or Allow List.
Disabled - The default is Disabled.

Allow List - Click +Add to have a new entry. The maximum

number you can add is up to 6.
Only the chosen IP objects within the selected IP group object can
access the services listed on this page via the LAN interface.
Discard current settings and return to the previous page.
Save the current settings and exit the page.
298