Draytek Vigor C410 Series User Manual page 213

New Password/
Confirm New
Password
Status
Group Policy
Expiration Time
Role
Allow Login from WAN
User Information
MFA
When a user tries to access the Internet, he or she must supply a valid
user name and password combination for authentication. The profile
with matching user name and password will be applied to the session.
General
Active – Enable the general settings in this page.
Inactive – Disable the general settings in this page.
It is available if "IAM User" is selected as the usage.
Select a group policy profile to be applied by this user profile.
It is available if "IAM User" is selected as the usage.
Set the network connection to work at certain time interval only. All
user accounts will apply the time configuration automatically by
default.
Never – The network connection is always on.
Expire in –The network connection will expire and terminate the
connection after specified minutes, hours, days, or weeks once built.
Expire at – The network connection will expire and terminate the
connection on the date and time specified below once built.
Date

Time

Expiration Time

It is available if "Router Management" is selected as the usage.
Administrator

Guest

Users

It is available if "Router Management" is selected as the usage.
If enabled, the user can login from WAN by using this user account.
Enable Email – Switch the toggle to enable or disable the email
setting.
Email – Enter the email address for receiving the MFA PIN code.

Send Email Notification to the newly created User – Send a

notification email to this user account.
Enable SMS – Switch the toggle to enable or disable the SMS setting.
SMS - Enter the destination SMS number for receiving the MFA

PIN code.
Multi-factor authentication (MFA) can offer a more secure network
connection.
Enable MFA – Switch the toggle to enable/disable the MFA function.
Allowed MFA Method - Select to require mOTP, TOTP or 2-step

authentication when logging in from the WAN.
TOTP – For the Time-based One-time Password (TOTP) mechanism,
please make sure the time zone of your router is correct. Then, install
Google Authenticator APP on your cell phone. Open the APP to scan
the QR code on this page. A one-time password will be shown on your
phone.
203