Download Print this page

Draytek Vigor C410 Series User Manual page 63

Vpn router with wlan/lte/5g-nr

Advertisement

Available settings are explained as follows:
Item
Profile Name
Jitter
Latency
Packet Loss
Cancel
Apply
Description
Enter a name as the Link Health Check profile.
Switch the toggle to enable or disable the jitter function.
Jitter Threshold - It defines the change rate of latency. For stable
session, small jitter value will be better.
When the detected value is greater than the value set here, the
connection will be regarded as unstable and connection failure.
Switch the toggle to enable or disable the latency function.
Latency Threshold - It defines the time taken by Vigor router when
sending the packets to the IP set in Link Condition Detection.
When the detected value is greater than the value set here, the
connection will be regarded as unstable and connection failure.
Switch the toggle to enable or disable the packet loss function.
Loss Rate - It defines the proportion that packets will be discarded
before arriving at the IP set in Link Condition Detection.
When the detected value is greater than the value set here, the
connection will be regarded as unstable and connection failure.
Discard current settings and return to previous page.
Save the current settings and exit the page.
53

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vigor C410 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Vigor c510 seriesVigor c410axVigor c510ax