Draytek Vigor C410 Series User Manual page 44

The Vigor router will automatically connect to Ethernet WAN connection. Once connected and
powered on, the router will run through a list of network connection settings (based on the
autohunt profiles) to determine if it can establish a connection. If it is unable to connect, the
mechanism will proceed to the next ISP setting until it receives an IP address.
Item
Reset
+Add
To add a new autohunt profile, click the +Add link to get the following page.
Available settings are explained as follows:
Item
Description
Click to clear all profiles to factory settings.
Click to bring up the configuration page of the virtual WAN profile
(max. 5).
Description
34