Draytek Vigor C410 Series User Manual page 305

+Add
Server IP
Port
Option
Apply
Cancel
After finishing this web page configuration, please click Apply to save the settings.
III-1-1-4 SNMP
This section allows you to configure settings for SNMP services.
The SNMPv3 is more secure than SNMP through the use of encryption (supports AES and DES) and
authentication (supports MD5 and SHA) for the management needs.
Open System Maintenance>>Device Settings and click the SNMP tab.
Available parameters are explained as follows:
Item Description
Enabled Switch the toggle to enable/disable the SNMP function.
If enabled, Manager, Query, Agent and Trap settings will be valid for you to
configure.
Manager Any - Any IP can be set as the manager host.
Host
Specific Host - Specify a host (IPv4 or IPv6) or hosts (both IPv4 and IPv6).

and system information to Syslog.
Syslog Servers
Click to display new entry boxes for creating a new Syslog server
profile.
The maximum number of Syslog servers to be added is "3".
Enter the IP address of the Syslog Server.
Enter the port number of the Syslog Server.
Delete - Click it to remove the selected server profile.
Save the current settings and exit the page.
Discard current settings and return to the previous page.
SNMP
Manager
IP Type – Select Both, IPv4 or IPv6.
295