Draytek Vigor C410 Series User Manual page 146

Available settings are explained as follows:
Item
Object Name
IP Version
Address Type
Start IP Address
End IP Address
IP Address
Subnet Mask
Invert
Match Type
Start IP Address
End IP Address
IP Address
Prefix Length
Invert
Cancel
Description
Enter the name that identifies this profile.
Select the IP version (IPv4, IPv6 or Both) for entering correct IP
address.
Select the type (IP or Subnet) of address.
IPv4 Settings
Enter the beginning IP address, if the Address Type is IP.
To set a range of IP addresses, enter the different IP addresses as
start IP address and end IP address.
Enter the ending IP address, if Address Type is IP.
Enter an IP address if Address Type is Subnet.
Enter subnet mask, if Address Type is Subnet.
If enabled, all addresses except the ones entered above will be used.
IPv6 Settings
Specify the match type (128 Bits or Suffix 64 Bits) for the IPv6 address.
Enter the beginning IPv6
range of IP addresses, enter the different IP addresses as start IP
address and end IPv6 address.
Enter the ending IPv6 address, if Address Type is IP.
Enter an IPv6 address if Address Type is Subnet.
Enter IPv6 prefix length, if Address type is Subnet.
If enabled, all addresses except the ones entered above will be used.
Discard current settings and return to the previous page.
136
address, if the Address Type is IP. To set a