Draytek Vigor C410 Series User Manual page 13

I-1-2 LED Indicators and Connectors for Vigor C510
Before you use the Vigor modem, please get acquainted with the LED indicators and connectors
first.
LED
LED
Connectors
Interface
Factory Reset
WAN
P1~P4
SIM
ON/OFF
PWR
Status Explanation
Blinking The router is powered on and running normally.
Off The router is powered off.
On Internet connection is ready.
Blinking The data is transmitting.
Off Internet connection is not ready.
SIM card is inserted into the slot and detected by Vigor
On
device.
Blinking No SIM card in detected.
On The LAN port is connected.
Blinking The data is transmitting.
Blinking The data is transmitting.
Explanation
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for
more than 5 seconds. When you see the ACT LED begins to blink rapidly
than usual, release the button. Then the router will restart with the factory
default configuration.
Connector for remote networked devices (by Ethernet cable).
Connectors for local networked devices.
Slots for installing SIM card(s).
Power switch.
Connector for a power adapter.
3