Draytek Vigor C410 Series User Manual page 302

III-1 System Maintenance
For the system setup, there are several items that you have to know the way of configuration:
Device Settings, Management, Firmware, Backup & Restore, Accounts and Reboot System, and
Firmware Upgrade.
III-1-1 Device Settings
The user can modify the time, device name, and Syslog for the device.
III-1-1-1 Time
Open System Maintenance>>Device Settings and click the Time tab.
It allows you to specify where the time of Vigor device should be inquired from.
Available parameters are explained as follows:
Item
System Time
Set Time
When Automatically
with Time Server is
selected as Set Time
Description
System Time
Display current time.
Time Setting
Determine the method (automatically or manually) to set the time.
Automatically with Time Server - Set the system time by retrieving
time information from the specified network time server using the
Network Time Protocol (NTP).
Manually - Set the system time using the time reported by the web
browser
.
Time Zone - Select the time zone where the router is located.
Time Server - Enter the web site of the primary time server.
Interface - Renew the time through the selected WAN/LAN interface.
292