Dell PowerEdge T410 Hardware Owner's Manual page 54

Table 1-3. System Messages (continued)
Message
Time-of-day not
set - please run
SETUP program
Timer chip
counter 2 failed
TPM
configuration
operation
honored. System
will now reset.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
TPM failure
54
About Your System
Causes
Incorrect Time or Date
settings; faulty system
battery.
Faulty system board.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
This message displays during
system restart after a TPM
configuration command has
been entered. User
interaction is required to
proceed.
A Trusted Platform Module
(TPM) function has failed.
Corrective Actions
Check the Time and Date
settings. See "Using the
System Setup Program and
UEFI Boot Manager" on
page 61. If the problem
persists, replace the system
battery. See "System Battery"
on page 139.
See "Getting Help" on
page 185.
Information only.
Enter I or M to proceed.
See "Getting Help" on
page 185.