Dell PowerEdge T410 Hardware Owner's Manual page 53

Table 1-3. System Messages (continued)
Message
The following
DIMMs should
in
match
geometry:
x , x , ...
The following
DIMMs should
in rank
match
count:
x , x , ...
The following
DIMMs should
match in size:
x , x , ...
The following
DIMMs should
in size
match
and geometry:
x , x , ...
The following
DIMMs should
in size
match
and rank count:
x , x , ...
Thermal sensor
not detected on x
Time-of-day
clock stopped
Causes
Invalid memory
configuration. The specified
memory modules do not
match in size, number of
ranks, or number of data
lanes.
A memory module without a
thermal sensor is installed in
the specified memory slot.
Faulty battery or faulty chip. See "Troubleshooting the
Corrective Actions
Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 106.
Replace the memory
module. See "System
Memory" on page 106.
System Battery" on page 160.
About Your System
53