Table 1-1. Diagnostic Indicator Code (continued)
Code
Causes
Hard drive failure.
Possible USB failure.
No memory modules
detected.
System board failure.
Memory configuration
error.
Possible system board
resource and/or system
board hardware failure.
Possible system resource
configuration error.
Other failure.
Corrective Action
Ensure that the diskette drive and
hard drive are properly connected.
See Hard Drives for information
on the drives installed in your
system.
See "Troubleshooting a USB
Device" on page 156.
See "Troubleshooting System
Memory" on page 162.
See "Getting Help" on page 185.
See "Troubleshooting System
Memory" on page 162.
See "Getting Help" on page 185.
See "Getting Help" on page 185.
Ensure that the diskette drive,
optical drive, and hard drives are
properly connected. See
"Troubleshooting Your System" on
page 155 for the appropriate drive
installed in your system. If the
problem persists, see "Getting
Help" on page 185.
About Your System
27