Sata Settings Screen - Dell PowerEdge T410 Hardware Owner's Manual

Dell server hardware owner's manual
Hide thumbs Also See for PowerEdge T410:
Table of Contents

Advertisement

Option
Execute Disable
(Enabled default)
Number of Cores per
Processor
(All default)
Turbo Mode
(Enabled default)
C States
(Enabled default)
Processor 1 Family -Model-
Stepping

SATA Settings Screen

Option
SATA Controller
Port A
(Auto default)
Port B
(Off default)
Port C
(Off default)
Port D
(Off default)
Port E
Port F
Description
Enables or disables execute disable memory protection
technology.
If set to All, the maximum number of cores in each
processor is enabled.
If Turbo Boost Technology is supported by the
processor(s), enables or disables Turbo Mode.
When set to Enabled, the processor(s) can operate in all
available power states
Displays the family, model and stepping of the selected
processor
Description
ATA Mode enables the integrated SATA controller. Off
disables the controller.
Auto enables BIOS support for the device attached to
SATA port A. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port B. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port C. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port D. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port E. Off disables BIOS support for the device.
Auto enables BIOS support for the device attached to
SATA port F. Off disables BIOS support for the device.
Using the System Setup Program and UEFI Boot Manager
67

Advertisement

Table of Contents
loading

Table of Contents