Dell PowerEdge T410 Hardware Owner's Manual page 35

Table 1-2. LCD Status Messages (continued)
Code Text
E1810 Hard drive ##
fault. Review
& clear SEL.
E1812 Hard drive ##
removed. Check
drive.
E1920 iDRAC6 Upgrade
Failed
E1A14 SAS cable A
failure. Check
connection.
E1A15 SAS cable B
failure. Check
connection.
E1A1D Control panel
USB cable not
detected.
Check cable.
Causes
The specified hard drive
has experienced a fault.
The specified hard drive
has been removed from
the system.
The iDRAC6 Express card
is not installed properly or
the card is bad.
SAS cable A is missing or
bad.
SAS cable B is missing or
bad.
USB cable to the control
panel is missing or bad.
Corrective Actions
See "Troubleshooting a
Hard Drive" on page 167.
Information only.
Reseat the iDRAC6
Express Card. See
"Installing an iDRAC6
Express Card" on
page 127.
If the problem persists,
see "Getting Help" on
page 185.
Reseat the cable. If the
problem persists, replace
cable.
If the problem persists,
see "Getting Help" on
page 185.
Reseat the cable. If the
problem persists, replace
cable.
If the problem persists,
see "Getting Help" on
page 185.
Reseat the cable. If the
problem persists, replace
cable.
If the problem persists,
see "Getting Help" on
page 185.
About Your System
35