Minolta MAGICOLOR 2 Manual page 91

System Use
Printer
Memory
This hotlink provides the status of the hard disk.
Disk(s)
Total
This hotlink provides the status on established timeouts.
Wait
Job
Shows the size (in KB) of the System Use. Also
known as System Memory, this non-configurable
client is the amount of RAM used to run the
printer's operating system. It's never increased or
decreased. The system memory subtracted from
the total amount of RAM identifies the amount of
RAM available for all the other memory clients.
Configuration Menu: No equivalent
Shows the size (in KB) of the total amount of RAM
that your printer has.
Configuration Menu: Administration/Memory/
Manual Config/MB Printer Mem
Provides the name, size, and free space on all
attached hard disks.
Configuration Menu: No equivalent
Identifies the total space and free space on all
attached hard disks.
Configuration Menu: No equivalent
Shows the maximum number of seconds the
PostScript emulation waits for incoming data.
Configuration Menu: Administration/
Communications/Timeouts/PS Wait Timeout
This shows the maximum number of seconds the
printer processes a print job before it ends the job.
Configuration Menu: Administration/
Communications/Timeouts/Job Timeout