Table of Contents
Advertisement
If a blank start-up page ejects or blank pages come out during a print-
ing job, try the following:
1
Check the toner cartridges.
The image does not print if the cartridges are empty.
2
If the toner cartridges are not empty and blank pages are
ejecting, take each cartridge out, rock it from side to side,
and reinstall it in the printer.
3
If these solutions do not work, contact your QMS vendor to
purchase another toner cartridge.
If the printer stops printing in the middle of your file, try the following:
1
Check your cable.
You could have the wrong kind of cable, or your printer may not
be configured for the correct cable and port.
2
Make sure no one pressed the Cancel key while your job was
printing.
3
Check the message window to see if the cassette you are
using is out of media.
Advertisement
Table of Contents
