Minolta MAGICOLOR 2 Manual page 117

This status message...
FUSER OIL LOW
IDLE
INITIALIZING
INNER JAM
INPUT IDLE
PRINTING
OUTPUTBIN OUTPUTBIN
JAM
means...
The oil bottle for the fuser
unit is running low.
The printer is on line, but
no jobs are in process.
The printer is warming up
and getting ready to go on
line.
Media has jammed
leaving the OPC belt
cartridge area.
The printer is on line and
printing jobs already in
the queue. No new jobs
are arriving at the
communication
interfaces.
Media has jammed
between the print engine
and the specified tray.
Do this...
If you have a new
fuser oil bottle on
hand, you may
want to install it
now. If you don't,
order one now. A
limited number of
copies (about 100)
will still print.
However, when the
oil runs out, the
printer stops and
the FUSER OIL
EMPTY message
appears.
No action needed.
Wait. No other
action needed.
Locate and remove
the jam.
No action needed.
Locate and remove
the jam.