Table of Contents
Advertisement
This status message...
COPIER OPTION NOT
INSTALLED
CREATED FILE
CREATING XXXXXXXXXXXX
FILE, PLEASE WAIT
END JOB
EXTENDED ACCOUNTING
FILE SIZE
FUSER MISINSTALLED
FUSER OIL EMPTY
means...
The Copy key was
pressed while the printer
was on-line, but the
CrownCopy option is not
installed.
The accounting file has
been created.
The specified accounting
file is created when
accounting is enabled and
the files are not in
existence or these files
are created following a
Reset Accounting.
( XXXXXXXXXXXX
represents the Job
Accounting or Paper
Accounting file.
The Cancel key has been
pressed.
The size of the non-empty
accounting file has been
increased successfully.
The fuser is not fully
seated.
The oil bottle for the fuser
is empty. The printer will
not print any more copies
until a new oil bottle is
installed.
Do this...
If you want to copy,
install a Crown-
Copy scanner.
Otherwise, no
action is needed.
No action needed.
Wait. No other
action needed.
Press Select to
provide an end-of-
job indicator for a
print job that does
not have one
No action needed.
Ensure the fuser is
fully seated.
Install a new fuser
oil bottle.
Advertisement
Table of Contents
