If you have an optional lower input feeder, you may choose to have
the printer automatically draw media from the other cassette (input-
bin) when the current cassette empties. This is called cassette chain-
ing, and it provides a total media input capacity of 500 sheets.
There are four ways to enable/disable cassette chaining:
n
Use your application. (Check the documentation to see if your
application includes a specific procedure for using a dual-
cassette printer.)
n
Select an alternate cassette for chaining in the QMS Level 2
Windows printer driver.
n
On a network, use CrownAdmin 3 to select the media cassettes
and/or the media source.
n
Configure the printer through the configuration menu.
Menu
Operator Control/Chain Inputbins
Choices
On—Switches to the next cassette with the same size and
Off—Doesn't switch cassettes; uses only the default cassette.
On Any—Switches to the next cassette, regardless of the size
Default
On
Notes
Use the Operator Control/Inputbin menu to set the default
inputbin.
type of media when the default cassette is empty.
and type of media installed, when the default input bin is
empty.