Minolta MAGICOLOR 2 Manual page 64

s Caution: The fuser unit is an integral part of the imaging process and
is also expensive to replace. Fuser life will be shortened (or the fuser
permanently damaged) if the oil bottle and cleaning roller are not
changed when needed and installed properly. This type of damage is
not covered under warranty or service contract.
M WARNING! The fuser unit can become extremely hot and cause
severe burns. Make sure the unit is cool before handling it.
ACHTUNG! Die Fixiereinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereinheit einige
Zeit abkühlen, bevor Sie diese berühren.
1 Turn off the printer.
2 Open the printer's top cover.
3 Open the two cleaning roller
lock levers.