Table of Contents
Advertisement
4
Compare the calibration page to
the four calibration cards that
were provided with your printer.
Each card features a single color—
cyan, magenta, yellow, or black.
a
Place the calibration page on a sheet of clean white paper in
a well-lighted area.
b
Align the cutout in the cyan color
calibration card over the cyan
column on the calibration page.
c
Decide which block on the calibration page most closely
matches the cyan color calibration card.
»
Note: It may be easier to decide which colors match if you
view the output at a distance (3–4 feet) and squint.
d
Make a note of the value (-4 to +4) associated with that block,
or simply mark the pane through the cutout in the card.
You will need this value in step 6.
e
Repeat steps b–d with the magenta, yellow, and black
calibration cards.
5
Access the printer's Administration/Engine/Density/Cyan
menu.
Advertisement
Table of Contents
