Minolta MAGICOLOR 2 Manual page 27

Print system
Table of Contents

Advertisement

»
Note: If a certain resolution is chosen and the minimum amount of
memory is not installed in the printer, the file is printed using the next
lower resolution that can handle the job. For example, if you attempt
to print a 4-color image at 2400x600 dpi resolution on legal media,
but the printer has only 24 MB of RAM instead of the required 88 MB
minimum, the file prints at 600x600 dpi.
Media
300x300/600x600
Size
Mono
Letter/A4 24 MB
Legal
24 MB
» Note: These values are for a printer without a hard disk. For a printer with
a hard disk installed and disk swapping enabled, add an additional 4 MB
of RAM for each media size.
* Additional memory required on a magicolor 2 CX
** Additional memory required on a magicolor 2 CX and magicolor 2 EX
You may also need additional memory (SIMMs) for the following:
n
To print complex graphics or complex PostScript documents
n
For increased collation performance
n
For increased spooling performance
1200x600
4-Color
Mono
24 MB
24 MB
24 MB
24 MB
2400x600
4-Color
Mono
40 MB*
24 MB
48 MB*
24 MB
4-Color
72 MB*
88 MB**

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qms magicolor 2

Table of Contents