Minolta MAGICOLOR 2 Manual page 119

Print system
Table of Contents

Advertisement

This status message...
SCANNER NOT CONNECTED The Copy key has been
SCANNING...
TEST PRINT
TONER ABSENT
x TONER EMPTY
x TONER LOW
x TONER OUT
TOP COVER OPEN
TR UNIT MISINSTALLED
TRANSPORT JAM
means...
pressed, but the scanner
cannot be accessed.
The CrownCopy scanner
is scanning a document.
A test print page is printing. No action needed.
The toner cartridge is not
installed.
The x (color) toner
cartridge is empty.
The x (color) toner is low.
There is enough toner left
to print 330 pages before
the printer stops.
The x (color) toner is out.
The printer stops.
The top cover of the
printer is not fully closed.
The transfer unit is not
installed incorrectly.
Media has jammed while
passing through the
engine.
Do this...
Turn off the printer
and scanner, turn
on the scanner,
wait 5 seconds, and
then turn on the
printer. If this
doesn't work, make
sure the printer and
scanner are cor-
rectly connected.
No action needed.
Install a toner
cartridge.
Replace the toner
cartridge.
Redistribute the
toner in the car-
tridge, or replace
the cartridge.
Replace the toner
cartridge.
Ensure the top
cover is fully
closed.
Check the transfer
unit installation.
Locate and remove
the jam.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qms magicolor 2

Table of Contents