Rs-232C Device; Rs-232C Connection - NEC VERSA P Service Manual

RS-232C Device

Use the following steps to install an RS-232C device. First, read "Docking Station II Op-
tions" earlier in this section for pre-installation guidelines.
1. Power off the Docking Station II and any optional devices connected to it. Con-
nect one end of the RS-232C cable to the serial communication port on the
Docking Station II. Connect the other end to the serial device.
Secure the connections using the screws provided.
2.
Troubleshooting and Options for the Docking Station II
Figure Section 5-36 RS-232C Connection
RS-232C
Cable
5-29