Boot Device Setup - NEC Versa Note VX Series Service And Reference Manual

n
Wake Up from Suspend Alarm/Resume Alarm Time — Allows the alarm to wake up
the system from Suspend. Designates the time parameter in five minutes increments.

Boot Device Setup

Boot Device Setup allows you to define the following functions.
Parameter
Quick Boot
Silent Boot
Boot Display Device
BootUp NumLock
st
1 Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Try Other Boot Devices
1
Bootable device when set to IDE hard drive. Only one IDE device is bootable
n
Quick Boot — Specifies whether or not the system performs all tests during system
boot.
n
Silent Boot — Specifies whether or not to display the NEC logo during the system boot.
n
Boot Display Device — Specifies the display device(s) for system boot messages.
n
BootUp NumLock — Specifies whether NumLock is On or Off at system startup.
n
Boot Devices — Specifies the sequence of boot devices and whether or not the system
attempts to boot from a device other than those specified.
n
Other Boot Devices — Allows you to specify IDE devices as bootable devices.
2-16 System Configuration and Setup
Boot Device Setup
Default Setting
Enabled
Enabled
Simul. Mode
Auto
1
CD/DVD
1
Floppy
1 st
1 Fnd IDE
1
Disabled
Yes
Alternate Setting(s)
Disabled
Disabled, Black
CRT only, LCD only
On, Off
st
Disabled,1 Fnd IDE,Floppy
CD/DVD,SCSI,Network
st
Disabled,1 Fnd IDE,CDROM
Disabled,Floppy,CD/DVD
st
Floppy,CD/DVD,1 Fnd IDE
No
.