Cmosdump.exe; Enablacu Utility; Highlite.exe; Videomod.com - NEC VERSA P Service Manual

2-18 Setup and Operation

CMOSDUMP.EXE

Use this utility to dump the CMOS to a printer.

ENABLACU Utility

This utility restores Auto Setup at power-on after the program has been disabled via the
System menu in Auto Setup. To use this utility, type ENABLACU at the operating system
prompt.

HIGHLITE.EXE

Increases LCD brightness.

VIDEOMOD.COM

Type this command at the DOS prompt to toggle between LCD, CRT, or both LCD and
CRT simultaneously. Function key Fn F3 also sets this mode.

WBATTERY.EXE

Type this command to view a fuel gauge icon in the Windows Program Manager. The icon
communicates battery status.

BIOS UTILITIES

The following BIOS utilities are also available:
n

BIOS Customize Utility (BCU)

n

BIOS Update Utility (BUU).

BIOS Customize Utility (BCU)
Each system ships with a BIOS Customize utility on the Hardware Utilities diskette. The
BCU creates a customized sign-on message that is displayed at power-on. After a custom-
ized sign-on message is created, the sign-on message appears every time the system is pow-
ered on.
BIOS Update Utility (BUU)
The BIOS Update utility updates the ROM BIOS version of the system. This software util-
ity updates the Flash ROM installed on the system board. The utility identifies and saves the
currently installed BIOS version before installing the new version. Make sure that switch 1
on the dip switch is off to enable the BIOS reprogramming, allowing the BIOS to be up-
dated. To receive the latest BUU diskette (in the U.S. only), call the Technical Support
Center at (800)-632-4525 or download the BUU by logging onto NEC's Electronic Bulletin
Board System (BBS) and perform the procedures described in the following subsections.