Crt Base Removal; Top Cover Screw; Crt Base/Top Cover Assembly - NEC VERSA P Service Manual

5-4 Troubleshooting and Options for the Docking Station II

CRT Base/Top Cover Assembly

Use the following steps to remove the CRT base cover or the top cover assembly.
1. Remove the CRT base from the Docking Station II.
Notches
2. To remove the top cover, first remove the screw on the Docking Station II's rear
panel.
Tabs
Figure Section 5-1 CRT Base Removal
Figure Section 5-2 Top Cover Screw
CRT Base