Secondary Battery Pack; Releasing The Diskette Drive - NEC VERSA P Service Manual

3-4 Options

SECONDARY BATTERY PACK

The secondary battery pack is installed in the system's diskette drive slot. This procedure
involves removing the standard diskette drive. Use the following steps to install the secon-
dary battery pack in the diskette drive slot.
1. Turn off system power.
To remove the diskette drive, push the diskette drive release latch on the bottom
2.
of the system to the left while pulling out the diskette drive. Put the diskette drive
aside for future use.
Figure Section 3-3
Diskette Drive
Release Latch

Releasing the Diskette Drive