Parameter Descriptions; Comms - NEC VERSA P Service Manual

2-12 Setup and Operation
Table Section 2-6 Auto Setup Parameter Options
Menu
Keyboard
Typematic Rate
NumLock Boot Status
System Password
Keyboard Lock Hot Keys
Power
Power Management
Power Management under AC
BackLight
HighLight
System Sound Power
PCMCIA Power
Suspend Warning Tone
Resume on Serial Port Ring
Resume on Time of Day
System
Quick Boot
Setup Lock
Time/Date
Time
Date

Parameter Descriptions

Read the following for an understanding of each parameter's function.

Comms

This menu item changes the I/O address for the serial and parallel ports. Change the default
address and interrupt level only if a conflict exists. The Comms menu also sets the parallel
port mode.
For system security, disable a port entirely by selecting the "Disable" setting.
Default Setting
Normal
NumLock Off
Disable
Disable
High
Disable
Full
Full
Enable
Enable
Enable
Disable
Disable
Disable
Disable
HR:MIN:SEC
MO/DAY/YEAR