Operating Controls; Control And Button Locations; Control And Button Functions - NEC VERSA P Service Manual

OPERATING CONTROLS

The following section describes system controls, the LCD indicator panel, and function
keys. The section also lists dip switch settings.
Refer to Figure Section 2-2 and Table Section 2-2 to locate system controls and buttons.
Power Button
Suspend Button
Figure Section 2-2 Control and Button Locations
Table Section 2-2 Control and Button Functions
Control
Power Button
Suspend Button
Brightness Control
VersaTrack
Function
Turns the system on when pulled down and off when pulled down
again. The power button is spring-loaded and returns to its original
position when powering on or off the system.
Allows the user to manually select Suspend mode. To enter Suspend
mode, press the suspend button. To exit Suspend mode, press the
suspend button again. Use Auto Setup to activate Suspend mode
automatically.
Move the control upward to increase brightness on the LCD. Lower the
control to decrease brightness on the LCD. A brighter adjustment uses
more battery power. For longer battery life, decrease the brightness.
The VersaTrack ® is used like a mouse to select menu items or to
initiate system options in the Windows environment. Place your thumb
on the VersaTrack and roll the ball to move it. Use the two buttons on
either side of the VersaTrack to select a function. Functions differ
depending on the application. Use the Windows control panel to set the
speed of the pointer.
Setup and Operation
Brightness
Control
2-3