Boot Device Setup
Boot Device Setup allows you to define the following functions.
Parameter
Quick Boot
Silent Boot
Boot Display Device
Docking Station Video
BootUp NumLock
st
1
Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Try Other Boot Devices
st
1
IDE Hard Drive
nd
2
IDE Hard Drive
rd
3
IDE Hard Drive
th
4
IDE Hard Drive
1
These setup items are only visible when system is docked
2
Bootable device when set to IDE hard drive. Only one IDE device is bootable
Quick Boot — Specifies whether or not the system performs all tests during system
!
boot.
Silent Boot — Specifies whether or not to display the NEC logo during the system boot.
!
Boot Display Device — Specifies the default display device(s) for the system.
!
Docking Station Video — Selects whether or not a video card installed in the Docking
!
Station is enabled at system boot.
BootUp NumLock — Specifies whether NumLock is On or Off at system startup.
!
Boot Devices — Specifies the sequence of boot devices and whether or not the system
!
attempts to boot from a device other than those specified.
Other Boot Devices — If yes, BIOS tries to boot from other boot devices if all selected
!
boot devices fail to boot.
st
1
- 4
!
Boot Device Setup
Default Setting
Enabled
Enabled
Simul. Mode
1
Dock Stn.
Auto
2
SuperDsk
2
CD/DVD
2
Floppy
2
st
1
Fnd IDE
Yes
Internal
VersaBay
DS Internal
DS VersaBay
th
IDE Hard Drive — Selects priority of IDE hard drives for boot devices.
Alternate Setting(s)
Disabled
Disabled, Black
CRT only, LCD only
Portable
On, Off
st
Disabled/1
Fnd IDE/Floppy
CD/DVD/SCSI/Network
st
Disabled/1
Fnd
IDE/Floppy/SuperDsk
st
Disabled/1
Fnd IDE/SuperDsk
CD/DVD
Disabled/Floppy/SuperDsk
CD/DVD
No
VersaBay/DS Internal/
DS VersaBay
VersaBay/DS Internal/
DS VersaBay
Internal/VersaBay DS/VersaBay
Internal/VersaBay/DS Internal
.
.
System Configuration and Setup 2-21