Table of Contents
Advertisement
This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and
understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows 8.1" refers to
®
Windows
8.1 Professional 64 bit system. Configuration and application installation should be conducted by a user who has administrator privileges.
If a [User Account Control] screen comes up, please be sure to confirm the contents before continuing.
The information contained within this manual applies to the following models:
• VC Model: VC26M/C-H, VG26M/C-H
Note:For details about a model number, please see "Model number list" (p.25).
1
Checking Included Accessories .............................................2
2
Connecting Included Accessories ..........................................2
3
Windows Setup ......................................................................3
4
Knowing the Parts ..................................................................6
1
5
Battery ....................................................................................8
6
Keyboard ................................................................................9
7
The NX Pad..........................................................................10
8
Switching Display Outputs....................................................11
Note:The illustrations, screenshots, icons, and on-screen text shown in this document may differ from the ones you actually encounter.
User's Guide
VC Model
9
LAN Function....................................................................... 11
10
Wireless LAN Function ........................................................ 13
11
Memory ............................................................................... 14
12
System Configuration .......................................................... 15
13
Security Chip Function ........................................................ 16
Applications ......................................................................... 17
Recovery ............................................................................. 20
Appendix ............................................................................. 24
Advertisement
Table of Contents
Related Manuals for NEC VersaPro VC
Summary of Contents for NEC VersaPro VC
-
Page 1: Table Of Contents
User's Guide VC Model This User's Guide contains information primarily specific to this computer, assuming that the user is able to perform basic Windows operations and understands how to use help in its installed applications to resolve problems. In this user's guide, unless specified, "Windows 8.1" refers to ®... -
Page 2: Checking Included Accessories
Failure to do so may cause damage. • Connect the LAN cable, only after completing Windows setup and firewall NEC软件的使用条件 【即EULA】(对顾客的特别提示) configuration. Or, turn on the wireless LAN. (请务必先仔细阅读如下内容后，决定是否打开本个人电脑的包装) This ensures that your computer can be safely connected to a network. -
Page 3: Windows Setup
Turning on the power Windows Setup When you first power up your new computer, it is necessary to perform Windows setup. If the AC adapter is not properly connected, the power is not turned on by pressing the power switch when you first turn the power on. Check that the AC adapter is connected Important points during setup again. - Page 4 If you accidentally turn off the power during setup Setup cannot progress to the next step unless you enter a valid PC name. The setup process will not be successfully completed and Windows system files or the registry may be corrupted. When the [Get online] screen appears, click [Skip this step].
- Page 5 Double click [Computer Management]. On the tree displayed on the left side of the window, click [Storage] [Disk If you are using model VG26M/C-H, you cannot create a recovery drive. If Windows Management]. does not start normally, set up the system again using the included "Recovery Disc". Select the volume marked as (C:) and right click it.
-
Page 6: Knowing The Parts
Explanation of Components Knowing the Parts Number Name Explanation LCD display This is the computer's display. Names and descriptions of your computer's major Status LEDs These indicate various states of the computer. This is used to turn the computer on/off or change ... - Page 7 Number Name Explanation Status LEDs (19) Microphone input jack A regular microphone can be connected to Power LED provide audio input. LED state Computer State (20) This port can be used to connect to USB devices. USB 3.0 port ( Blue Computer power on This USB port supports USB 3.0, USB 2.0, and...
-
Page 8: Battery
Num Lock indicator LED Battery LED state Computer State On (Green) <Num Lock> is on (Part of the keyboard can be used as a numeric keypad)) <Num Lock> is off • Never touch the battery slot terminals. It may cause contact failure. ... -
Page 9: Keyboard
Battery pack installation Keyboard Please install the battery pack according to the following illustration. Battery lock Battery lock Using the keys Guide Hotkeys (Using <Fn>) By pressing the function key <Fn> in combination with another key, you can easily change common computer settings. These functions are called "Hotkeys". Key Sequence Function Japanese... -
Page 10: The Nx Pad
Tapping a fingertip against the pad results in a click. Quickly tapping the pad twice The NX Pad results in a double-click. Tapping the pad to produce a click or double-click is called "tapping" or "double tapping". If you tap the pad with the pointer aligned on the target, and then touch the pad again and move your finger, this operation will result in a drag. -
Page 11: Switching Display Outputs
Switching Display Outputs LAN Function Display outputs can be switched using the keyboard. This section covers important points and the correct procedure for setting up the LAN (Local Area Network) function. LAN settings Do not use this operation if the external display is not connected. The following provides a simple explanation about how to perform network setup in Press <Fn>... -
Page 12: Network Booting Function
Network booting function (PXE) • In order to enable WoL, it is necessary to install special software on the This enables booting via a network, and remote connection to your computer from an administrator's PC to allow sending of Magic Packets. administrator's PC which allows you to do the following. -
Page 13: Wireless Lan Function
Configuring the wireless LAN Wireless LAN Function • The wireless LAN functionality can be configured with the [Power Management] tab Turning the wireless LAN on/off in Driver properties. • When settings are at the factory default values, only 2.4 GHz can be used. When The following methods can be used to turn the wireless LAN on and off. -
Page 14: Memory
Align the notched part of the memory with the protrusion of the connector, Memory and insert the memory at about a 30 degree angle relative to the connector until the memory terminals click. When inserting the memory, these parts move Installing memory outward. -
Page 15: System Configuration
Restoring default factory setting values System Configuration Please follow these steps to restore your system to the default factory settings. Enter the BIOS setup utility. The BIOS setup utility Press the <F9> key. A confirmation screen should be displayed. Press the <Esc> button to cancel and exit. Confirm that [Yes] is selected and then press <Enter>. -
Page 16: Security Chip Function
If a confirmation screen is displayed after the computer restarts, press Security Chip Function <Shift> + <F10>. The settings are saved and the computer restarts. The security chip is now initialized. Outline To use the security chip again, enable it by following the procedure of "Enable the security chip". -
Page 17: Applications
Performing Battery Refresh and Performance Diagnostics Applications For battery refresh and performance diagnostics, perform the following steps. ® Microsoft Office Single Image v15 When performing battery refresh and performance diagnostics, the battery and the AC adapter must be connected. ® Microsoft Office Single Image v15 is not pre-installed in the Japanese version of Start [Battery tool]. - Page 18 If the [Battery tool Files in Use] screen is displayed, click [NEC Battery • DoD-introduced mode (3 times erasure + Verify) Tool-Scheduler (Process Id:XXXX)], and then click [Continue]. Deletes data from the hard disk in a method compliant to the U.S. Department of Defense Standard.
- Page 19 Remove the "Application Disc" from the optical drive and restart Windows. [Control Panel] of application screen, select [System and Security] [NEC-Airbag Now, the HDD Active Protection System has been installed. Protection], and click [Help] in the opened window.)
-
Page 20: Recovery
Precautions during Recovery Recovery Follow the following precautions during recovery. Follow the steps in the manual and on the recovery screen Recovery Basics During recovery, be sure to follow the steps in this manual and on the recovery screen. Here we will explain the basics before recovery. Please read this before performing Missing a step, pressing a key other than the indicated key, or changing the procedure recovery. - Page 21 When recovery cannot be performed Using the "Recovery Disc" If [Recovery could not be completed.] is displayed, it is possible that model Recover the computer using the DVD (Recovery Disc). information was written incorrectly. Please contact our repair facilities. Do not leave the computer alone during recovery Be sure to start operations with the computer's power turned OFF.
- Page 22 Display the charm bar, and click [Settings]. Using the Windows function Click [Change PC settings]. Recover the computer using the Windows function. Click [Update and recovery]. The subsequent procedure differs depending on whether or not the computer can Click [Recover]. start up.
- Page 23 Windows Setup If the desired device is not listed on the [Boot Override] menu, press <F10> and check Perform Windows setup. to see that [Yes] is selected. Then, press <Enter>, restart the BIOS setup utility, and Windows Setup select the desired device. Set up the Windows system by referring to "...
-
Page 24: Appendix
Creating a recovery drive Appendix We recommend that a "recovery drive" be created for times when problems such as corrupted files result in Windows not loading correctly. Disabling the "Fast Startup" function The "Fast Startup" function allows quick computer startup from the power-off state. The •... -
Page 25: Specifications
Model number list Specifications Model name Model number Model name VC26M/C-H VG26M/C-H VC26M/C-H PC-VC26MCLCEECH, PC-VC26MCLCEHCH, PC-VC26MCLCLECH, PC-VC26MCLCLHCH, ® *2, *14 CPU* Intel Core i5-4300M processor PC-VC26MCLJJECH, PC-VC26MCLJJHCH, Maximum memory (RAM) 8GB [SO-DIMM (2 slots)] PC-VC26MCLJZECH, PC-VC26MCLJZHCH Power Lithium ion battery (M) (10.8 VDC, Typ. 3070 mAh VG26M/C-H PC-VG26MCLEBEGH, PC-VG26MCLEBENH, (The battery pack is a consumable.) - Page 26 MEMO...
- Page 27 MEMO...
- Page 28 In the event that the product is used for the above facilities and/or equipment or in control systems, etc. where personal injury and/or property damage is caused, NEC assumes no responsibility.