Extron electronics DTP3 T 212 D User Manual page 4

FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause interference. This interference must be corrected at the expense of the user.
ATTENTION:
•
The Twisted Pair Extension technology works with unshielded twisted pair (UTP) or shielded
twisted pair (STP) cables; but to ensure FCC Class A and CE compliance, STP cables and STP
Connectors are required.
•
La technologie extension paires torsadées fonctionne avec les câbles paires torsadées
blindées (UTP) ou non blindées (STP). Afin de s'assurer de la compatibilité entre FCC Classe A et
CE, les câbles STP et les connecteurs STP sont nécessaires.
NOTES:
•
This unit was tested with shielded I/O cables on the peripheral devices. Shielded cables must be
used to ensure compliance with FCC emissions limits.
•
For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility,
accessibility, and related topics, see the
Extron website.
Extron Safety and Regulatory Compliance Guide
on the