Extron electronics DTP3 T 212 D User Manual page 26

Product Configuration Software
The DTP3 T 212 D can be easily configured using Extron Product Configuration Software (PCS). This section
describes the software installation and communication (see the DTP3 T 212 D Help File for detailed control
information). Topics include:
•
Software/Firmware Installation
• Connecting to PCS
•
Software Overview
Software/Firmware Installation
Visit www.extron.com
NOTES:
•
Download the latest version of software and firmware for your product.
•
An Extron Insider account is required to download and use the firmware or software. Contact an Extron
support representative to obtain an insider account.
1. Access the
2. Mouse over the Download tab at the top of the page (see figure 12,
Figure 12. Software Links on Download Screen
3. Click the appropriate link on the drop-down list. The Download Center page opens.
For software, either click the Software link (
The Download Center Software page opens (see
NOTE: If the software is listed, click that link (see the PCS Product Configuration Software link in
figure 12,
For firmware, click the Firmware link (
The Download Center Firmware page opens (see
to download and install the PCS software.
Extron website, and log in to your Extron Insider account.
). The software product page opens. Skip to
3
).
2
figure 13 on page 16).
step 5
).
4
figure 14 on page 17).
DTP3 T 212 D • Product Configuration Software
).
1
on page 16.
18