Menu Bar - NEC POWERMATE VE - SERVICE MANUAL 08-1996 Service Manual

2-8 Setup and Operation
T
The legend bar
summary of command keys for using Setup.
T
The General Help window
pressing F1
about using Setup.
The following subsections describe how to use the Main Menu window to set system
parameters.

Menu Bar

The menu bar at the top of the Main Menu window lists these menus:
T
Main Use this menu for basic system configuration. For example, select Main
to set the system time, system date, diskette drives, and video parameters. Use
this menu to check memory parameters, numlock, and boot options.
T
Advanced
interrupts, to enable/disable the system's diskette drive controller and dual-IDE
controllers, and to enable a Plug and Play operating system such as Windows 95.
The Advanced menu also provides, for example, menu items for setting
parameters for large disks (using large disks with Windows NT™), enable/disable
onboard sound and surround sound, and enable/disable the mouse port.
Some of the Advanced features are accessible only with a Supervisor password.
T
Security
fixed disk boot sector, and the Backup and Virus-check reminders.
T
Power Use this menu to configure Power Management features.
T
Boot Use this menu to select the boot device (diskette drive, CD-ROM reader,
or hard drive)
T
Exit Exits the Setup utility with options to save or discard changes, load
defaults, or load previous values.
To select an option from the menu bar, use the left and right arrow keys.
See "Exiting Setup" in this section for a description on exiting the Main Menu.
the area at the bottom of the screen. The legend bar provides a
a window that appears any time during Setup after
or Alt H . This help window provides two pages of general information
Use this menu to set serial port and printer port addresses and
Use this menu to set User and Supervisor Passwords, diskette access,