Table of Contents
Advertisement
Note: You can bypass the POST memory
test by pressing the space bar.
If a problem occurs, a series of beeps may sound. If this
happens repeatedly after powering on, power off the system
and turn to Chapter 6. This chapter provides some helpful
hints on obvious system problems.
Note: If the system displays a message
indicating that system settings have changed,
run Setup (see Chapter 4).
On models loaded with the Windows NT
press
Ctrl-Alt-Del
log-on box appears for entering a password.
Shutting Down
Follow these steps to shut down (power off) your computer.
1. Save your work. See the documentation that comes with
your application.
2. Exit the application program.
3. Close any open applications. If you have programs in the
taskbar, click on them and close them.
4. Make sure that the hard drive and diskette drives are off.
If the hard drive light or diskette drive light is lit, it
indicates that the drive is in use.
when prompted on-screen to do so. The
Using Your Computer 2-3
®
operating system,
Advertisement
Table of Contents
