Simm Removal; Simm Socket - NEC POWERMATE P60D Service Manual

SIMM Removal

Remove SIMM sticks from the system board as follows.
1. Remove the top cover, and any full size expansion boards as previously described.
Spread apart the two clips at each end of the SIMM stick (the clips are part of the
2.
system board's connectors). Tilt the SIMM stick forward, allowing the post to
slide out of the hole in the SIMM stick.
Remove the SIMM stick from the system board. Repeat step 2 for each SIMM to
3.
be removed.
Hole
Post
NOTE: If more information is needed, see the
installation instructions in Section 3, Options.
Figure Section 5-18 SIMM Socket
Desktop Repair
Clips
5-11