Standard Cmos Setup - NEC POWERMATE P60D Service Manual

2-10 Setup and Operation
The legend bar at the bottom of the Main Menu shows the command keys to use to exit
the Main Menu, select a menu option, change the background color of the screen, and save
settings and exit Setup.
To choose a selection from the Main Menu, use the keyboard's up or down arrow keys
to highlight the selection, then press
the screen.
If System Hangs, Reboot System and Enter Setup by pressing the <DEL> Key
For normal operation, press any key to continue to the Setup selection. If the system locks
up for any reason, reboot the system by pressing the
enter Setup.
The following sections describe how to use the Main Menu selections to set system
parameters.

Standard CMOS Setup

This menu modifies the basic system features, as outlined in the following table.
Select a parameter by using the keyboard arrow keys and pressing the
or key to modify the parameter. Press
PgUp PgDn
the Main Menu, press
standard CMOS Setup parameters.
Enter . A message similar to the following appears on
System Configuration
1992 American Megatrends Inc., All Rights Reserved
Improper Use of Setup may Cause Problems!
Do any of the following After Entering Setup
(i) Alter Options to make System Work
(ii) Load BIOS Setup Defaults
(III) Load Power-On Defaults
Hit <ESC> to Stop now, Any Other Key to Continue
to save and exit the Setup program. Table Section 2-1 list the
F10
CAUTION: Incorrect settings can cause the
system to malfunction.
Warning Information
keys. Press the
Ctrl Alt Del
to exit back to the Main Menu. At
Esc
key to
Del
key. Press the
Enter