SIMM Removal
Remove SIMM sticks from the system board as follows.
1.
Remove the top cover, and any full size expansion boards as previously described.
Open the two clips at each end of the SIMM connector (see Figure Section 5-12). Tilt
2.
the SIMM stick forward, so that the SIMM can be removed from the socket.
3.
Remove the SIMM stick from the system board. Repeat step 2 for each SIMM to be
removed.
Hole
Post
NOTE: Detailed information on removing SIMM
sticks is in Section 3, Options.
Figure Section 5-12 SIMM Socket
Desktop Repair
Clips
5-13