Desktop Setup; Desktop Voltage Selector Switch - NEC POWERMATE P60D Service Manual

2-2 Setup and Operation

Desktop Setup

Set up the desktop systems by making the following connections. (See the following sub-
section, Minitower Setup, if setting up a minitower computer).
1. At the rear of the system, set the voltage selector switch to 115V or 230V and
insert the power cord into the system power socket (see Figure Section 2-1).
Figure Section 2-1 Desktop Voltage Selector Switch
CAUTION: The correct AC input voltage must
be properly set. Select the appropriate voltage
with the voltage selector switch located at the
rear of the system.
System Power
Socket
Voltage Selector
Switch