NEC POWERMATE P60D Service Manual page 58

3-12 Options
4. Insert the OverDrive processor by aligning the notch corner with inner alignment
hole of the socket (see Figure Section 3-22).
Figure Section 3-22 OverDrive Processor Alignment
Set the jumper settings for the installed OverDrive processor (see Section 2,
5.
Setup and Operation).
Replace any removed expansion boards.
6.
7. Replace the top cover and run Setup to reconfigure the computer for the Over-
Drive processor (see Section 2, Setup and Operation).
Dot
Notched
Corner of
Chip (heatsink
not shown)
Alignment
Hole