Table of Contents
Advertisement
Interrupts can be detected when "out of range" conditions occur. User
!
prompts are displayed to alert the user to a potentially harmful
condition.
LDCM Admin Function
The following information is for System Administrator use in
administrating local area networks. This information applies to systems
that are configured for Windows 98, Windows 2000, or Windows NT.
The LANDesk Client Manager (LDCM) Admin function is installed on
the C drive of the system when LANDesk Client Manager is installed
from the NEC Application and Driver CD. For information on installing
LANDesk Client Manager, see "Launching the Application and Driver
CD" in Chapter 3.
With LANDesk Client Manager installed, start LDCM Admin as follows.
Power up the system.
1.
Click
, point to
2.
Start
In Explorer, double click
3.
4.
Double click
5.
Double click
Cheyenne Backup
Cheyenne Backup is a data management and backup program, available
on systems running the Windows 98 or Windows 2000 operating system.
This program is separate from but integrates into the Intel LANDesk
Client Manager's Smart Hard Drive Auto-Backup Utility and the NEC
Backup Utility.
If hard drive performance degrades due to bad sectors or other internal
problems, the Smart Hard Drive utility automatically invokes the
Cheyenne Backup program and backs up the entire file system to a
network drive.
Note
Cheyenne Backup does not work in conjunction with an ATAPI
tape drive.
Cheyenne Backup can also do regularly scheduled backups and scan files
for viruses during a backup operation.
4-8 Managing System Resources
, and click
Programs
.
(C:) Landesk
Admin
.
Setup.exe
and follow the prompts.
.
Explorer
Advertisement
Table of Contents
