Table of Contents
Advertisement
Menu Item
Keyboard Features
Numlock
Key Click
Keyboard auto-repeat rate
Keyboard auto-repeat delay
Legacy USB Support
Boot-Time Diagnostics Screen
System Memory
Main Menu Items
Settings (default is bold)
Press Enter to check or change keyboard
parameters.
Auto, On, Off
Selects the power-on state for Num Lock.
Disabled, Enabled
Enables or disables key click.
30/sec, 26.7/sec, 21.8/sec, 18.5/sec,
13.3/sec, 10/sec, 6/sec, 2/sec
Selects key repeat rate.
1/4 sec, 1/2 sec, 3/4 sec, 1 sec
Selects delay before key repeat.
Disabled, Enabled
Disables or enables legacy USB support.
Disabled, Enabled
Selecting Enabled displays the diagnostic
screen during boot.
Displays amount of conventional memory
detected during boot.
This field is read-only and cannot be changed
from BIOS Setup.
Example: 640 KB
Configuring the System 3-11
Advertisement
Table of Contents
