Table of Contents
Advertisement
Menu Item
I/O Device Configuration
Serial Port A
Base I/O Address
Interrupt
Parallel Port
Mode
Base I/O Address
Interrupt
Advanced Menu
Settings (default is bold)
Press Enter to access the following
submenus.
Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the port.
Setting at Auto enables the BIOS or
operating system to configure the port.
3F8, 2F8, 3E8, 2E8
Selects the base I/O address for serial
port A.
IRQ3, IRQ4
Selects the IRQ for serial port A.
Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the port.
Setting at Auto enables the BIOS or
operating system to configure the port.
Output Only, Bi-directional, ECP
Selects parallel port mode.
378, 278, 3BC
Selects the base I/O address for the LPT
port.
IRQ5, IRQ7
Selects the IRQ for the LPT port.
Configuring the System 3-15
Advertisement
Table of Contents
